Flanges

Conflat flanges (CF) are designed to enable affordable, repeatable seals, that have low leak rate and the ability to withstand the high temperatures used for de-gassing (up to 450°C) without leaking. Our range of UHV flanges are fully compatible with the internationally agreed standards and will connect to any other compliant CF flange. Available, as standard, in 304L and 316LN ESR.

View as List Grid

Items 1-60 of 81

Page
per page
Set Descending Direction
  1. 34mm OD - 304L Fixed Blank CF Flange
    8 to 10 weeks delivery
    £10.86
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  2. 34mm OD - 304L Tapped Fixed Blank CF Flange
    8 to 10 weeks delivery
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  3. 70mm OD - 304L Fixed Blank CF Flange
    8 to 10 weeks delivery
    £16.42
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  4. 70mm OD - 304L Tapped Fixed Blank CF Flange
    8 to 10 weeks delivery
    £22.42
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  5. 114mm OD - 304L Fixed Blank CF Flange
    8 to 10 weeks delivery
    £46.60
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  6. 114mm OD - 304L Tapped Fixed Blank CF Flange
    8 to 10 weeks delivery
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  7. 152mm OD - 304L Fixed Blank CF Flange
    8 to 10 weeks delivery
    £82.50
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  8. 152mm OD - 304L Tapped Fixed Blank CF Flange
    8 to 10 weeks delivery
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  9. 203mm OD - 304L Fixed Blank CF Flange
    8 to 10 weeks delivery
    £143.07
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  10. 203mm OD - 304L Tapped Fixed Blank CF Flange
    8 to 10 weeks delivery
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  11. 254mm OD - 304L Fixed Blank CF Flange
    8 to 10 weeks delivery
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  12. 34mm OD 19mm ID - 304L Fixed Bored CF Flange
    8 to 10 weeks delivery
    £10.23
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  13. 34mm OD 19mm ID - 304L Tapped Fixed Bored CF Flange
    8 to 10 weeks delivery
    £11.17
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  14. 70mm OD 41mm ID - 304L Fixed Bored CF Flange
    8 to 10 weeks delivery
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  15. 70mm OD 41mm ID - 304L Tapped Fixed Bored CF Flange
    8 to 10 weeks delivery
    £22.55
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  16. 114mm OD 70mm ID - 304L Fixed Bored CF Flange
    8 to 10 weeks delivery
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  17. 114mm OD 70mm ID - 304L Tapped Fixed Bored CF Flange
    8 to 10 weeks delivery
    £59.19
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  18. 152mm OD 102mm ID - 304L Fixed Bored CF Flange
    8 to 10 weeks delivery
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  19. 152mm OD 102mm ID - 304L Tapped Fixed Bored CF Flange
    8 to 10 weeks delivery
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  20. 203mm OD 153mm ID - 304L Fixed Bored CF Flange
    8 to 10 weeks delivery
    £135.33
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  21. 203mm OD 153mm ID - 304L Tapped Fixed Bored CF Flange
    8 to 10 weeks delivery
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  22. 34mm OD - 304L Rotable Blank CF Flange
    8 to 10 weeks delivery
    Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  23. 70mm OD - 304L Rotable Blank CF Flange
    8 to 10 weeks delivery
    Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  24. 114mm OD - 304L Rotable Blank CF Flange
    8 to 10 weeks delivery
    Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  25. 152mm OD - 304L Rotable Blank CF Flange
    8 to 10 weeks delivery
    Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  26. 203mm OD - 304L Rotable Blank CF Flange
    8 to 10 weeks delivery
    £0.00
    Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  27. 254mm OD - 304L Rotable Blank CF Flange
    8 to 10 weeks delivery
    Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  28. 34mm OD 6mm ID - 304L Rotable Bored CF Flange
    8 to 10 weeks delivery
    Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
  29. 34mm OD 6mm ID - 304L Tapped Rotable Bored CF Flange
    8 to 10 weeks delivery
    £0.00
    Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
  30. 70mm OD 41mm ID - 304L Rotable Bored CF Flange
    8 to 10 weeks delivery
    £42.74
    Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
  31. 70mm OD 41mm ID - 304L Tapped Bored CF Flange
    8 to 10 weeks delivery
    £51.28
    Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
  32. 114mm OD 70mm ID - 304L Rotable Bored CF Flange
    8 to 10 weeks delivery
    £73.26
    Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
  33. 114mm OD 70mm ID - 304L Tapped Rotable Bored CF Flange
    8 to 10 weeks delivery
    £85.47
    Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
  34. 152mm OD 102mm ID - 304L Rotable Bored CF Flange
    8 to 10 weeks delivery
    £97.68
    Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
  35. 152mm OD 102mm ID - 304L Tapped Rotable Bored CF FlangeM8
    8 to 10 weeks delivery
    £103.79
    Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
  36. 203mm OD 153mm ID - 304L Rotable Bored CF Flange
    8 to 10 weeks delivery
    £195.36
    Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
  37. 203mm OD 153mm ID - 304L Tapped Rotable Bored CF Flange
    8 to 10 weeks delivery
    £0.00
    Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
  38. 254mm OD 206mm ID - 304L Rotable Bored CF Flange
    8 to 10 weeks delivery
    £0.00
    Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
  39. 254mm OD 206mm ID - 304L Tapped Rotable Bored CF Flange
    8 to 10 weeks delivery
    £0.00
    Rotatable bored Conflat Flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components. The rotatable flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part.
  40. 34mm OD - 316LN (2D) Fixed Blank CF Flange
    8 to 10 weeks delivery
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  41. 34mm OD - 316LN (2D) Tapped Fixed Blank CF Flange
    8 to 10 weeks delivery
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  42. 70mm OD - 316LN (2D) Fixed Blank CF Flange
    8 to 10 weeks delivery
    £37.95
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  43. 70mm OD - 316LN (2D) Tapped Fixed Blank CF Flange
    8 to 10 weeks delivery
    £95.24
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  44. 114mm OD - 316LN (2D) Fixed Blank CF Flange
    8 to 10 weeks delivery
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  45. 114mm OD - 316LN (2D) Tapped Fixed Blank CF Flange
    8 to 10 weeks delivery
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  46. 152mm OD - 316LN (2D) Fixed Blank CF Flange
    8 to 10 weeks delivery
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  47. 203mm OD - 316LN (2D) Fixed Blank CF Flange
    8 to 10 weeks delivery
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  48. 203mm OD - 316LN (2D) Tapped Fixed Blank CF Flange
    8 to 10 weeks delivery
    Fixed blank Conflat flange (CF) are available in the full range of sizes. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  49. 34mm OD 19mm ID - 316LN (2D) Fixed Bored CF Flange
    8 to 10 weeks delivery
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  50. 34mm OD 19mm ID - 316LN (2D) Tapped Fixed Bored CF Flange
    8 to 10 weeks delivery
    £22.00
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  51. 70mm OD 41mm ID - 316LN (2D) Fixed Bored CF Flange
    8 to 10 weeks delivery
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  52. 70mm OD 41mm ID - 316LN (2D) Tapped Fixed Bored CF Flange
    8 to 10 weeks delivery
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  53. 114mm OD 70mm ID - 316LN (2D) Fixed Bored CF Flange
    8 to 10 weeks delivery
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  54. 152mm OD 102mm ID - 316LN (2D) Fixed Bored CF Flange2D)
    8 to 10 weeks delivery
    £298.57
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  55. 152mm OD 102mm ID - 316LN (2D) Tapped Fixed Bored CF Flange
    8 to 10 weeks delivery
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  56. 203mm OD 153mm ID - 316LN (2D) Fixed Bored CF Flange
    8 to 10 weeks delivery
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  57. 203mm OD 153mm ID - 316LN (2D) Tapped Fixed Bored CF Flange
    8 to 10 weeks delivery
    Fixed bored Conflat flange (CF) are available in the full range of sizes. The smaller range of flange can accept a number of different standard tube sizes. These are prepared ready for welding onto chamber tubulations or components.
  58. 34mm OD - 316LN (2D) Blank CF Flange
    8 to 10 weeks delivery
    Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  59. 70mm OD - 316LN (2D) Rotable Blank CF Flange
    8 to 10 weeks delivery
    Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
  60. 114mm OD - 316LN (2D) Rotable Blank CF Flange
    8 to 10 weeks delivery
    Rotatable blank Conflat flange (CF) consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part. This allows the boltholes to align to mating flanges in any orientation. These are used to blank off unused chamber ports for leak-tight assembly, also allowing End User machining for non standard tube sizes or components.
View as List Grid

Items 1-60 of 81

Page
per page
Set Descending Direction