ProductsCF FlangesCFR Rotatable Bored Flanges

Rotatable Bored CF Flanges

Rotatable bored Conflat Flat (CF) flanges are welded onto chamber tubulations or vacuum components. Smaller sizes of flange can accept a number of different standard tube sizes. The rotatable CF flange consists of two parts, the inner knife edge detail and the outer bolt hole retaining ring which rotates around the inner part, this allows the bolt holes to align to mating flanges in any orientation.

Picture Gallery & Schematic

304L Rotatable Bored CF Flanges (CFRL Series) 
DN Number OD mmOD inchMounting holesClear Bore A mmFlange Thickness B mmLand Thickness C mmTube Counter Bore D mmRotatable Tube Bore E mmBoltHole PCD F mmBolt Hole Diameter (or thread) mmNo. Of Bolt HolesTube Size to Fit Flange Bore mmShipping Weight (kg)Previous VG CodeOrder Code
DN16 341.33Clear6.47.6N/A6.419.3274.366.350.1ZFCR97CFR34-6
DN16341.33Tapped6.47.6N/A6.419.327(M6)66.35 ZFCR97TCFR34T-6
DN40 702.75Clear40134.841.341.958.76.8641.270.3ZFCR41CFR70-41
DN40 702.75Tapped40134.841.341.958.7(M6)641.270.3ZFCR41TCFR70T-41
DN63 1144.50Clear6817.58707192.18.4869.80.9ZFCR70CFR114-70
DN63 1144.50Tapped6817.58707192.1(M8)869.80.9ZFCR70TCFR114T-70
DN100 1526.00Clear99.4209.5101.9104.9130.28.416101.61.7ZFCR100CFR152-102
DN100 1526.00Tapped99.4209.5101.9104130.2(M8)16101.61.7ZFCR100TCFR152T-102
DN160 2038.00Clear149.7229.5152.6155.71818.420152.42.6ZFCR150CFR203-153
DN160 2038.00Tapped149.7229.5152.6155.7181(M8)20152.42.6ZFCR150TCFR203T-153
DN200 25410.00Clear200.424.59.5203.5206.4231.88.424203.23.7ZFCR200CFR254-206
DN20025410.00Tapped200.424.59.5203.5206.4231.8(M8)24203.2 ZFCR200TCFR254T-206  
All dimensions are in mm unless otherwise stated
316LN (2D Forged) Rotatable Bored CF Flanges (CFRL Series) 
DN Number OD mmOD inchMounting holesClear Bore A mmFlange Thickness B mmLand Thickness C mmTube Counter Bore D mmRotatable Tube Bore E mmBoltHole PCD F mmBolt Hole Diameter (or thread)No. Of Bolt HolesTube Size to Fit Flange BoreShipping Weight (kg)Order Code 316LN 
DN16 341.33Clear6.47.6N/A6.419.3274.366.350.1CFR34-6-LN
DN40 702.75Clear40134.841.341.958.76.8641.270.3CFR70-41-LN
DN63 1144.5Clear6817.58707192.18.4869.80.9CFR114-70-LN
DN100 1526Clear99.4209.5101.9104.9130.28.416101.61.7CFR152-102-LN
DN160 2038Clear149.7229.5152.6155.71818.420152.42.6CFR203-153-LN
DN200 25410Clear200.424.59.5203.5206.4231.88.424203.23.7CFR254-206-LN
All dimensions are in mm unless otherwise stated

Other specialist sizes and materials, including Tri-Forged 316LN, are available upon request call +44 (0) 1424 856333

Related Products

  • UHV PRODUCTS

    Gaskets & Accessories

    To make a leak tight UHV seal between two conflat flanges, a gasket is required. Our gaskets are manufactured from quality controlled precision sheet material.

  •  

  •  

  •  

Call us on : +44 (0) 1323 379 335 or email: sales@vacgen.com