ProductsZ Axis ManipulatorsLTM Wide Bore Series

LTM Wide Bore Series Z-Axis Manipulator

Z-Axis transfer mechanism, with edge welded bellows providing a 68mm clear bore. High accuracy and stable.  Actuation options: manual or motor driven providing controlled motion. Can be mounted in any orientation.

 

Technical Data Table
Flange SizeDN63, Top flange is M8 tapped, lower flange is clear bore
Bore68mm Clear Bore
Travel range25mm to 150mm
Motion controlManual, Stepper Motor, Encoded Stepper Motor, DC Motor
Operating Pressure1 bar to 10-11 mbar
Leak rate1x10-10 mbar ls-1
Operating Temperature-20°C to +200°C
Baking Temperature+250°C after removing motors, if fitted
Torque required to elevate1Nm
Maximum Axial load300N

 

Dimension Table
TypeFlangeFlange OD inchTravel mmOperationExtendedCompressedOverallPart Code
OD mmA mmA mmHeight mm
DN63114 Tapped4.525Manual125100253ZLTM11425HW
DN63114 Tapped4.550Manual150100278ZLTM11450HW
DN63114 Tapped4.575Manual175100303ZLTM11475HW
DN63114 Tapped4.5100Manual200100328ZLTM114100HW
DN63114 Tapped4.5150Manual250100375ZLTM114150HW
DN63114 Tapped4.525Stepper motor125100307ZLTM11425SMS
DN63114 Tapped4.550stepper motor150100332ZLTM11450SMS
DN63114 Tapped4.575stepper motor175100357ZLTM11475SMS
DN63114 Tapped4.5100stepper motor200100382ZLTM114100SMS
DN63114 Tapped4.5150stepper motor250100432ZLTM114150SMS
DN63114 Tapped4.525Stepper with encoder63100307ZLTM11425SMSE
DN63114 Tapped4.550Stepper with encoder92100332ZLTM11450SMSE
DN63114 Tapped4.575Stepper with encoder125100357ZLTM11475SMSE
DN63114 Tapped4.5100Stepper with encoder163100382ZLTM114100SMSE
DN63114 Tapped4.5150Stepper with encoder215100432ZLTM114150SMSE
DN63114 Tapped4.525DC motor with PSU63100407ZLTM11425DCS
DN63114 Tapped4.550DC motor with PSU92100432ZLTM11450DCS
DN63114 Tapped4.575DC motor with PSU125100457ZLTM11475DCS
DN63114 Tapped4.5100DC motor with PSU163100482ZLTM114100DCS
DN63114 Tapped4.5150DC motor with PSU215100532ZLTM114150DCS
Prices quoted are Ex-works, UK site.

 

Related Products

  • UHV PRODUCTS

    Gaskets & Accessories

    To make a leak tight UHV seal between two conflat flanges, a gasket is required. Our gaskets are manufactured from quality controlled precision sheet material.

  •  

  •  

  •  

Call us on : +44 (0) 1424 856 333 or  sales@vacgen.com