Wobble Sticks Accessories

Wobble Stick Accessories
There are several accessories available to augment the performance of wobble sticks and enhance sample handling.
ESCA Stub Handling Forks	Stub Handling Fork
These attach to the end of the WS50 to WS240 range and are made in 2 standard lengths. The fork incorporates a small spring mechanism for locking the ESCA stubs in position whilst they are being carried. Remember that they will be inserted 8mm into the end of the wobble stick. WSTPS = 41mm from stub rest position to end of shaft, it adds 41mm minus 8mm = 33mm to the overall length of WS. WSTPL = 76mm from stub rest position to end of shaft, it adds 76mm minus 8mm = 68mm to the overall length of WS.
Specimen Sample Cassette	Specimen Sample Cassette
When using 14mm diameter by 1.2mm (maximum) thick discs, there is a standard sample cassette available for storing these samples. The cassette holds up to 11 discs and can be mounted on the end of a wobble stick or LDP / LDS (when using an appropriate bracket). The cassette is demountable as it is located on a removable index post. If there are several of these index posts (available as an individual spare item) mounted around the inside of the system, then the cassette can be transferred to where it is required. A pincer grip wobble stick is required to both load and unload samples from the cassette and to remove or replace the cassette from the index post. The sample cassette is supplied as standard with two index posts; these have an M3 x 8mm deep tapped hole for mounting. WSC = Sample Cassette Part Code (this includes 2 x Index Posts). WSCS = Spare Cassette Index Post Part Code.
Mechanical Hand Jaws